Monthly Archives: December 2013

Lomography Konstruktor step-by-step build

20131208_193342

Upon opening the box you have 2 sprues of parts, various body parts and a box of screws and fittings…
20131208_193415

… and the all important multi-lingual instruction book
20131208_193459

20131208_193533So here goes…

Step 01 is the lens20131208_200428

Step 02 assembles the viewfinder hood20131208_201527

Step 03 is the assembly of the body. The 1st stages are concerned with the winding mechanism…20131208_20383420131208_204255

In Step 04 you mount the N/B (Normal/Bulb) switch into the body…20131208_210613

Step 05 is the assembly of the body and lightbox…20131208_211238

The viewfinder hood support is next…20131208_211625

… followed by the wind and rewind keys…20131208_212606

The viewfinder hood and mirror reset switch are next…20131208_212851

The final step mounts the lens and adds any finishing touches you may wish to add from the included stickers…20131208_21443820131208_214548

Once you’ve loaded a 35mm film, you’re ready to go and take some photos…

The total build time was just under 2 hours (although I was watching TV at the same time!)

Advertisements

EFE releases for January and February 2014

EFE Nov

If any of these items are of interest please CONTACT US


%d bloggers like this: